My tiny stove is making little pieces of slag. I am mostly burning (Brown?) Ash. And some cardboard, junk mail, etc. The slag isn't plastic--i put it in the flame of a propane stove for a while.
The top (cream) is a heavy cotton canvas. The sides and bottom (blue) are nylon canvas, with a sealing layer. I put a piece of felt on the foam, under the cotton.
Cut the mattress into 3 pieces: two will be the couch, and the third will be used in the reading nook. All three will be used as a bed. I also got some perfect fabric to upholster it with.
Working on the couch/bed. Next step, I'll save for another day: cut the foam into three pieces. And then I'll need to sew upholstery for those pieces...
Cut a hole in the wall (see the tree in top center: those grow outside). This is for the stovepipe. I tell you, it's hard to cut hole through the sheathing, bigger than the hole through the metal! I hope that's the hardest part of this!
Spreading the last layer of liquid-applied shower waterproof membrane. I had just enough! It was like the widow's oil (Bible story, where God supplied, as much as they needed, until they ran out of places to put it)
Spreading glue and putting down rubber to be the "layer of last resort" -- if the other layers leak, this one should catch it and take it to the weep holes.
If you can decipher this picture, you'll see that the sunlight (from the South window) shines though our house. With the low winter angle, it almost shines out the North window (at the top of the picture). Our south windows are working so well! When the sun shines, we get so much heat in our house!
I got the house blocked up on solid piers. It doesn't rock at all when we walk around! I also strapped it to the anchors. It feels good to have the "due diligence" done. But we still are relying God's protection for big winds, of course!
Cranking in the earth auger house anchors. I put in most of them until the 3/4in shaft started twisting instead of rotating. I stopped before I twisted them off!